UVM-1

Because no conventional microscope could support the broad range of Craic's UV-VIS-NIR microspectrometers Craic Technologies developed the UVM-1. It is based on a Zeiss AxioImager with replaced optics to support UV light. Craic uses quartz and mirror based optics to allow wavelengths down to 200nm in the UV and up to 2500nm in the NIR with a surpassing image quality.

The UVM-1™ UV microscope can image in transmission, reflectance, polarization and even in fluorescence from the UV, visible, and NIR regions with high spatial resolution...all with the same microscope and without swapping components.

Features:

• Broadband microscope (200-2500nm) made from Zeiss AxioImager
• UV-VIS-NIR transmittance, reflectance, fuorescence with polarization
• UV or NIR digital absorption imaging with user selectable filters
• Laser input ports
• Compatible wit modular microspectrometers, Apollo Raman and rIQ
• Base microscope for 20/30PV

Applications: Cellular structure analysis, protein crystals, plankton microspectroscopy, tissue analysis, in vivo/vitro microspectroscopy, kinetics spectroscopy, combinatorial chemistry, drug development

Datasheet: UVM-1 UV microscope

508 PV Microspectrophotometer

The 508 PV™ microscope spectrophotometer is designed to add spectroscopy, color imaging, thin film thickness measurement and colorimetry capabilities to your optical microscope or probe station. It can also be used to upgrade an older microspectrometer with cutting edge optics, electronics and software.

Features:

• User selected spectral range from deep UV to NIR (250-2100nm)
• Permanently calibrated, variable measurement areas even below a micron
• Thermoelectric cooling available
• Incorporates high resolution, color digital imaging
• Featured with Lambdafire spectroscopy and imaging control and analysis software
• NIST traceable microspectrometer standards available
• For transmission, reflectance, fluorescence and polarization microspectroscopy

Applications: Thin film thickness measurements, colorimetry of microscopic samples, refractive index measurement,vitrinite reflectance in coal, coke and petroleum, biotechnology research

20/30 PV Microspectrophotometer

The innovative 20/30 PV™ microspectrophotometer is the newest and most powerful measuring instrument on the market for UV-VIS-NIR-microspectroscopy. It enables the measurement of spectra of transmission, absorption, reflection, emission und fluorescence in the UV-VIS-NIR of sample areas smaller than 1µm. While taking the microspectra™ the sample can be investigated in the deep UV, in color or in the NIR. Easy handling completes the system and increases ergonomics and enables automization.

Features:

• Spectral range: 200 bis 2500 nm
• Color measurement of microscopic samples
• Refractive index measurement with rlQ™-package
• Manual or automated operation
• Integrated cooling for low noise
• Including Lambdafire™  software  for spectroscopy and imaging, providing touch screen control
• Easy to handle and maintain

Applications: Microspectroscopy and imaging for transmission, reflections and fluorescence, Raman microspectroscopy, polarization microspectroscopy and imging, thin film measurements

Datasheet: 20/30 PV microspectrophotometer

FLEX Microspectrophotometer

FLEX™ from CRAIC is a full-featured yet flexibly configured instrument that incorporates UV-visible-NIR optics, spectrophotometers digital imaging, and software...all tied together with the Lightswitch by CRAIC™ optical multiplexer. With the Lightswitch by CRAIC™ technology, FLEX™ retains the ease-of-use for which CRAIC instruments are known, while being capable of everything from UV-visible-NIR microspectroscopy, high resolution microscopic imaging, refractive index measurements and more.

Features:

• UV-VIS-NIR Transmittance (240-950 nm)
• VIS_NIR Reflectance (300-950 nm)
• Fluorescence with 365, 420 and 546 nm
• Refractive index measurement with rlQ™-package
• Manual or automated operation
• Integrated cooling for low noise
• Including Lambdafire™  software  for spectroscopy and imaging, providing touch screen control
• Easy to handle and maintain

Applications: Microspectroscopy and imaging for transmission, reflections and fluorescence, Raman microspectroscopy, polarization microspectroscopy and imging, thin film measurements

Datasheet: FLEX microspectrophotometer

Apollo Raman Microspectrophotometer

The CRAIC Apollo™ Raman spectrometer is designed for fast, easy micro-Raman spectroscopy so you can focus on sample measurements and results, not instrument setup. As such, it is perfect for routine research, quality control and failure analysis. The CRAIC Apollo™ Raman spectrometer employs optics, software and hardware all optimized for Raman spectroscopy of microscopic samples. The CRAIC Apollo™ Raman spectrometer is perfect for rapid, non-destructive analysis in fields such as life sciences, materials science, chemistry and physics.

Features:

• Add to many types of optical microscopes
• Use alone or on Craic microspectrophotometers
• Modular system including laser, spectrometer, imaging and microscope interface with optics
• Stackable modules, up to 3 different lasers
• Different wavelengths available including 532, 638, 785, 830nm and more
• TE cooled CCD array detector for low noise and long term stability
• All solid state lasers and spectrometers for extreme durability
• Easy to handle and maintain

Applications: Life sciences, flat panel display, semiconductor metrology, biotechnology development, process impurity detection, biological research, MEMS devices, WMD detection

Datasheet: Apollo Raman microspectrometer

rIQ Refractive Index Measurement

rIQ™ is designed to measure and quantify the refractive index of microscopic fragments of glass.  rIQ™ stands for Refractive Index Quantification and is built based upon the thermo-optical methodology defined by ASTM E1967.  As such, it is an automated system which measures the refractive index of microscopic glass fragments by monitoring the change in refractive index of calibrated oils as they are heated and cooled.

Features:

• Automatic measurement per ASTM and SWGMAT standards
• Video recording of measurement procedure
• When added to Craic microspectrophotometers transmission, fluorescence and color spectra of glass can be measured
• Simple calibration
• Long term environment monitoring
• Offered as a turnkey standalone package or as an addon

Datasheet: rIQ refractive index measurement