Logo

Iradion’s CO2-Laser have a All Ceramic Resonator Technology who are offering a lot of benefits. Besides the fact, that ceramic has a lower thermal expansion coefficient than standard aluminium helping to increase the laser power stability over time, the range of reflection angles supported on the alumina walls is very restricted verses using aluminum waveguide walls.
This is critically important relative to suppressing bad, higher order modes in order to increase the beam quality, which is important especially for cutting applications.
However, the biggest advantage is probably the longevity of the original filled gas mixture thanks to the special resonator design. 

Your benefits:

  • No Oxidation and no change of the gas mixture. We ensure gas re-filling is required within 7 years of operation!
  • Higher modes are surpressed. This leads to a much higher focal power density and benefits to cutting applications
  • The laser can be installed vertically since no dirt can contaminate the mirrors inside

 More Information about the unique ceramic resonator concept can be found in an article published in the German magazine Photonik.

 

 Ceramic resonator concept

 


Iradion Z-line

Zserie

Special features of the Z-line:

  • Laser output power: 30 & 40 W
  • Wavelength: 10.6 µm
  • Only air-cooling
  • Same form, fit & function for both power-levels
  • Very compact

Datasheet: Iradion Z30/Z40

 


 

Iradion Infinity line

Infinity

Special features of the Infinity line:

  • Laser output power: 50, 60, 80, 100 und 120 W
  • Wavelengths: 9.3, 10.2 und 10.6 µm
  • Optionally air- or watercooling for all power-levels
  • Same form, fit & function for all power-levels

Datasheet: Iradion Infinity

  

 


 

Iradion 1625

Iradion1625

Special features of the 1625:

  • Laser output power 250 W
  • Wavelength: 10.6 µm
  • Only water-cooling
  • Most compact CO2-Laser for that laser power class

Datasheet: Iradion 1625

 


 

Contact

Andi 

Andreas Röhrl
This email address is being protected from spambots. You need JavaScript enabled to view it.
Tel: +49-(0)89-818 90 739
Mobile: +49-(0)170 9937061

 

  • logo_AMI.png
  • Logo_SLI.png
  • Logo_Radiantis.png
  • logo_Opto4U.png
  • logo_Optimet.png
  • logo_Max.png
  • Logo_Plasmo.png
  • logo_univet.png
  • logo_kmlabs.png
  • logo_Craic.png
  • Logo_Ondax.png
  • Logo_nLight.png
  • logo_Sakar.png
  • LOGO_PI.png
  • logo_scopeled.png
  • logo_WasatchPhotonics.png
  • logo_wavelength.png
  • logo_Iradion.png
  • logo_Litron.png
  • Logo_KLab.png
  • logo_Lasermech.png
  • logo_WLP.png
  • logo_CTI.png
  • logo_IRflex.png
  • logo_Xarion.png